What it costs to replace a bathroom vanity in Sydney
Replacing a bathroom vanity in Sydney costs between $1,500 and $4,500 all in for most homes, made up of four separate things: the labour, the vanity unit, the tapware, and any tiling repair needed once the old unit comes off the wall. Labour on its own is typically $1,000 to $2,000 excluding GST for a like for like swap, because the job now includes disconnecting and upgrading the plumbing, careful removal of the old unit, rubbish removal, surface preparation, installation, testing and a final clean.
If you already know what you want and are ready to book, our vanity installation service is the page to go to. The reason quotes vary so much is that the other three components range enormously and the fourth cannot be seen until the job starts.
The four costs, added up
| Component | Typical range | Notes |
|---|---|---|
| ComponentLabour | Typical range$1,000 to $2,000 ex GST | NotesA like for like replacement. More where plumbing moves, the unit is heavy or awkward, or tiling needs repair |
| ComponentThe vanity unit | Typical range$200 to $2,000 and up | NotesA basic hardware store unit to a made to order designer piece. Most of our clients spend $500 to $1,500 |
| ComponentTap, basin, plug and waste | Typical range$50 to $1,000 | NotesTapware is almost never included with the vanity. A basin, plug and waste can add $500 to $1,000 on top of the cabinet |
| ComponentRemedial tiling and making good | Typical range$0 to $1,500 | NotesOnly needed where the new unit is a different size or type to the old one, or where tiles come away with the old unit |
Ranges are based on vanity replacements Nu-Trend has completed across Sydney and are confirmed with a fixed written quote once we have seen the room.
That is why a straightforward replacement can come in around $1,500 and a considered one can pass $4,000, and why anyone quoting a single number without seeing the room is guessing.
The remedial tiling figure depends on how many tiles are affected and what has to happen to the wall: whether the surface needs preparation, whether waterproofing has to be reinstated, and whether matching tiles have to be sourced or you have spares from the original job. Spares are worth keeping for exactly this reason.
Labour: what the installation itself costs
The labour to replace a bathroom vanity in Sydney is generally between $1,000 and $2,000 excluding GST. The scope is more extensive than most people expect, which is where that figure comes from.
- Turning off the water and disconnecting the existing plumbing
- Removing the old vanity off the wall as carefully as possible. Units that were installed with large amounts of silicone can be very hard to remove without pulling tiles off the wall
- Rubbish removal from site, which carries tip fees
- Preparing the surfaces before the new unit goes in
- Preparing the plumbing so it can be upgraded as far as possible, with new mini taps and a new sewer trap
- Installing the new vanity. An awkward space or a heavy unit can mean two people on site
- Connecting the plumbing, then testing and commissioning the basin, tap and waste
- A final clean and a silicone finish on the gaps
Work that sits outside that figure includes moving taps or drainage, reinforcing a wall for a wall hung unit, converting from two taps to a single mixer, repairing tiling, and installing a mirror cabinet or lighting at the same time. Each is quotable in advance once someone has looked at the room.
The vanity: what people actually spend
Vanity units span an enormous range and the price does not track quality as neatly as people assume. At the entry level, a basic unit from a hardware retailer sits a little under two hundred dollars. A mid range wall hung unit with a ceramic top runs to seven or eight hundred. A made to order designer unit can be several thousand or more.
Most of our clients spend between $500 and $1,500 on the vanity itself, depending on the size, the style and the brand. That buys a unit with soft close drawers, a stone or engineered top and a finish that will still look right in ten years. Below about four hundred dollars the compromise is usually the carcass material and the drawer runners, both of which are what fail first in a bathroom.
On top of the cabinet, budget for the basin, the plug and waste and the tapware, which together commonly add another $500 to $1,000. Retailer prices move quickly, so rather than quote a specific product here we suggest pricing two or three units in your size band at Reece, Beaumont Tiles, The Bathroom Collective or a hardware retailer and bringing those to us before you buy.
Taps and mixers
Most vanity units are sold without tapware, which catches people out at the point of ordering. A basic chrome mixer starts around fifty dollars. A mid range mixer from a recognised brand sits between one and two hundred. Finishes other than chrome, particularly brushed brass, matte black and gunmetal, generally add to the price and are worth choosing at the same time as the towel rail and the shower fittings so the room reads as one set.
If you are converting from two taps to a single mixer, or the reverse, that is not a like for like swap. The existing tap holes and the supply pipework both have to be reworked, and it is worth deciding before the vanity is ordered because the vanity top has to match.
The cost nobody warns you about: remedial tiling
This is the single largest source of unexpected cost on a vanity replacement and it is entirely predictable once you know to look for it. Whatever sits behind and beneath the old vanity has been hidden for as long as the vanity has been there. In many bathrooms, particularly older ones, the tiling simply stops at the vanity, because the original tiler saw no reason to tile behind a cabinet.
The problem appears in three situations. If the new unit is narrower than the old one, untiled wall or floor is exposed at the sides. If you move from floor standing to wall hung, the entire floor beneath the old unit is exposed and may never have been tiled. If the old unit was silicone sealed to the wall, removing it usually damages the tiles it was sealed against.
When it is needed, the repair typically adds $300 to $1,500 depending on how many tiles are involved, whether the wall needs preparation or waterproofing, and whether matching tiles can be sourced. None of this is a reason not to replace a vanity. It is a reason to have someone look at the room and tell you before you commit, rather than discover it on the day.
Cost by scenario
| Scenario | What is involved | Indicative labour |
|---|---|---|
| ScenarioLike for like swap, same size and position | What is involvedLabour as listed above, plus your vanity and tap | Indicative labour$1,000 to $2,000 |
| ScenarioNew unit a different size to the old one | What is involvedAs above plus remedial tiling to the wall or floor | Indicative labour$1,000 to $2,500 |
| ScenarioFloor standing to wall hung | What is involvedWall reinforcement, exposed floor tiled, plumbing adjusted for the new height. Usually needs two people | Indicative labour$1,500 to $2,500 |
| ScenarioSingle to double vanity | What is involvedSecond set of plumbing connections, wider unit, tiling and possibly moving a mirror or lights | Indicative labour$1,500 to $3,000 |
| ScenarioReplacing a pedestal basin with a vanity | What is involvedFloor and wall made good where the pedestal was, plumbing relocated to suit | Indicative labour$1,000 to $2,500 |
Figures are for labour excluding GST. Add the vanity unit, basin, tapware and any tiling repair to arrive at the total.
Every one of these is confirmed with a fixed written price after we have seen the room or a clear photograph of it with measurements.
What makes a wall hung vanity cost more
A wall hung unit almost always costs more to install than a floor standing one, for three reasons. The wall has to carry the weight of the cabinet, the top, the basin and the water in it, which usually means opening the wall to add noggings or a bracket plate. The floor beneath the old unit becomes visible, and in many bathrooms it was never tiled. And the plumbing has to be adjusted to meet the new unit at a different height, with the waste and supply concealed rather than hidden behind a cupboard door. Because the unit has to be held in position while it is fixed, it usually takes two people.
The result is worth it in a small bathroom, because a visible continuous floor makes the room read as larger. It is a design decision with a real cost attached rather than a free choice.
Replacing just the basin
If the cabinet is sound and only the basin is damaged or dated, replacing the basin alone costs considerably less than replacing the whole unit. Whether it is possible depends on whether the basin is a separate item sitting on or in the top, or whether the basin and top are a single moulded piece, and on whether a replacement of the same cut out dimensions is available.
It is worth asking about, because the answer is often yes and it is a much smaller job.
Moving the vanity to a new position
Moving a vanity to a different wall changes the project from a replacement into a small renovation, because the water supply and the waste both have to be relocated. On a suspended timber floor, new pipework can usually be run underneath. On a concrete slab, the slab is saw cut to create a channel, the pipe laid, and the slab made good before the floor is repaired.
It is entirely doable and it is the sort of change that can transform a badly laid out bathroom. It is not, however, a vanity replacement, and it should be quoted as what it is. If the whole room is being done, our guide to bathroom renovation costs in Sydney is the better starting point, and if the floor under the old unit turns out to be damaged, what a subfloor repair costs covers that.
Common questions about vanity replacement costs
How long does it take to replace a bathroom vanity?
A straight like for like replacement usually takes between three and eight hours in a single visit. Where tiling has to be repaired, allow for two or three further short visits of around three hours each, because surface preparation, waterproofing, tiling and grouting each need curing time before the next step.
Do I need a plumber to replace a vanity?
Yes. Connecting the water supply and the waste to a fixture is plumbing work, and in New South Wales plumbing work must be carried out by a licensed person. Beyond the legal position, a connection that leaks slowly under a vanity is not noticed for months and damages the floor beneath it.
Can a handyman install a bathroom vanity?
A handyman can assemble and position a cabinet. Most cannot legally make the plumbing connections, and few will repair the tiling, the wall or the paintwork that a size change exposes. For a genuine like for like swap it may be adequate. For anything where size, position or wall type is changing, it is not.
Are expensive vanities worth it?
Up to a point. The things that separate a four hundred dollar unit from a twelve hundred dollar one are the carcass material, the drawer runners and the top, and all three affect how the unit looks after five years in a wet room. Above roughly two thousand dollars you are buying design and materials rather than durability, which is a legitimate choice but a different one.
Should I buy the vanity or should the installer supply it?
We recommend choosing the vanity you like but not buying it straight away. Looking at what is available shows you how much style and price vary, and lets you pick something that matches your taste and your budget. Before you order, we check the specifications against the existing space and make sure our labour quote reflects the real scope: whether the unit will actually fit, whether it is costly to make it fit, and whether it is the best choice for the room.
Nu-Trend does not stock vanities ourselves, but we help clients source them from suppliers such as Reece, The Bathroom Collective, Beaumont Tiles and Sannine, we can often arrange a trade discount, and we are happy to work with a supplier of your choosing. The aim is a unit that fits your budget, works with the installation cost, and is something you will still like in ten years.
Get a fixed price for your vanity
Send us a photograph of your existing vanity with the measurements and we can usually give you an indicative price the same day. Where the size or position is changing we will visit, look at what is behind the old unit and give you a fixed written quote.
Call Rick on 0401 165 779 or request a quote.


